Yamaha R6 & R1 Review ,Price,Picture,Feature
Some owners have complained of a spongy front brake feel, which can be cured by fitting aftermarket brake lines. Others have bled the brakes to release trapped air every two years or so, which also helps cure the problem.
Like nearly all Yamahas, the R6 is relatively bulletproof when it comes to long-term reliability, though it's not unheard of for starters to give up the ghost, compromising other parts of the electrical system-namely batteries-if not replaced.
Around town, you could run the rpms as low as you as you want and the complete fuel injection will enable you to open the throttle anywhere, anytime without missing a beat. Of course, everything starts happening a lot quicker erst you pass 8,000 rpm and the bike pulls difficult till red line at this point but, for riding conservatively in traffic, the R6 causes a nice friend. The foot pegs are now 5mm more forward for greater weight distribution to the front end. They are surely high and the bars are low, however I found the overall ride package a lot comfier than I had thought.
You are not going to want to go touring on this thing, however don't despair if your favorite set of twisties are a couple hours away, the suspension isn't going to bushed you to death on the way. I did not maintain a lot of of an eye on gas mileage, other than getting the fuel light to come on at around 120 mph after some severe throttle abuse in the deserted canyons. This is 2000 rpm higher than the former R6 model and it is the highest redline of a widely distributed production four-stroke engine the Honda CBR250RR had a reputed redline of 19,000. Such a high speed is near to degrees known just in Formula One engines , where valve springs stress issues lead to the adoption of pneumatic return at further than 19,000 rpm.
Although total claimed horsepower of 152 hp at 10,500 rpm is only a couple of ponies up on the previous-generation bike (and still some 10 to 15 hp shy of the GSX-R), it's delivered in a much smoother, more user-friendly way than its carbureted counterpart. First impressions can be misleading: You might think the new bike has lost some of its punch. But that impression goes away when you realize just how much cornering speed you carried through that last balls-out sweeper leading to Catalunya's pit straight, or how deceptively hard the R1 accelerated out of the third-gear left leading into a long right climbing the paddock hill-a corner you'd need to take in second on most open-classers to get the kind of muscular drive the R1 delivers as second nature once its midrange chimes in at approximately 5000 rpm.
The completely revamped (but still unmistakably styled) fairing and bodywork offer a 20mm-wider nose section, which improves wind and weather protection to the rider's shoulders and head, the latter thanks to the reangled slant to the R1's snake-eye "face." But even with a wider fairing, the new R1 feels small and nimble; it remains a motorcycle you feel you can flick into a turn almost as easily as its YZF-R6 little brother. Except that now you feel much more a part of the bike, thanks in part to the revised riding position (clip-ons angled back and slanted downward, and footpegs moved back slightly), but also the narrower, resculpted fuel tank, which, at the cost of a one-liter (0.3 gallon) reduction in capacity, is much easier to snuggle up close to than its wider, bulkier predecessor. And though seat height remains the same, there's definitely less weight on your arms and shoulders, making the new R1 less tiring to ride.
Showing posts with label YAMAHA. Show all posts
Showing posts with label YAMAHA. Show all posts
Wednesday, December 1, 2010
Thursday, November 11, 2010
MODIFIKASI YAMAHA V-IXION 2009
MODIFIKASI YAMAHA V-IXION 2009
Modifier of this one is the most good if you were told to dismantle the motor. Moreover, the smell of racing style modification. not be overlooked anymore reputation. And indeed the average arable home modifications modif Automodified Lent (LA), this was predictable, the edges are always synonymous with style racing
Even so, Adhi 'Siwe' Wicaksono Danukusuma secretly crave with spirits streetfighter motorcycle. Armed with V-Ixion publication in 2009 owned Yuong Kurniawan which incidentally is the brother-in-law itself, the idealist project was soon released.
"Motor streetfighter tend to have a frightening impression. And I want to make a figure V-Ixion who tend to look emaciated to be more manly. It can be seen through the debris at the foot-leg and upper body. I hope this bike will be more visible from above as well as muscular down, "supreme leader appointed the LA garage, this Probolinggo.
"Waste moge have qualities that far above the product variations. In addition, in view of waste moge also more prestigious," said builder who again hobby of photography about the components of choice for the legs.
GSX600 arm mounting headache enough. "To be fitted with a normal and safe, we modify the framework of the sector. How to add 'meat' at arm's house. So, the house arm in order width each 3 cm to the left and right," he explained
Siwe also dismantle all-out body sector. Starting from deltabox, the trick to create one from fiberglass. Dimensions of course adjust the width of the swing-arm.
Likewise with the tank design that also made a little wild. "Let me add a frightening impression that I want to highlight," point out the open garage builder in the area of Jl. Soekarno-Hatta No.. 93, Probolinggo.
A perfect combination!
Streetfighter-style bikes usually also synonymous with added head lamp design and a model that has frightening. "Initially my thoughts to apply a small head lamp projector nan concise. But, on the way, seemed less match. Less comfortable with this projector head lamp," added artificial Ninja 250R.
After hunting on the internet, Siwe decided to pinch-owned Suzuki Hayabusa head lamp. If installed once wrote, would result is less interesting. So Siwe necessarily make shell made from fiber. Proffered design lines deliberately tailored to the new look.
Have a cool design, the shell is also inserted a small lamp sein. This indicates that Siwe also consider the element of safety riding.
DATA MODIFICATION
Front tire: 120/70-17 Michelin
Rear tire: 190/50-17 Michelin
Front rim: Yamaha R1 3.5 inches
Rear rim: 6.5-inch Yamaha R1
Airs next: Upside down Yamaha R1
Sok back: Suzuki GSX600
Head lamp: Hayabusa
Gear: Vortex
Muffler: Nobi
Modifier of this one is the most good if you were told to dismantle the motor. Moreover, the smell of racing style modification. not be overlooked anymore reputation. And indeed the average arable home modifications modif Automodified Lent (LA), this was predictable, the edges are always synonymous with style racing
Even so, Adhi 'Siwe' Wicaksono Danukusuma secretly crave with spirits streetfighter motorcycle. Armed with V-Ixion publication in 2009 owned Yuong Kurniawan which incidentally is the brother-in-law itself, the idealist project was soon released.
"Motor streetfighter tend to have a frightening impression. And I want to make a figure V-Ixion who tend to look emaciated to be more manly. It can be seen through the debris at the foot-leg and upper body. I hope this bike will be more visible from above as well as muscular down, "supreme leader appointed the LA garage, this Probolinggo.
"Waste moge have qualities that far above the product variations. In addition, in view of waste moge also more prestigious," said builder who again hobby of photography about the components of choice for the legs.
GSX600 arm mounting headache enough. "To be fitted with a normal and safe, we modify the framework of the sector. How to add 'meat' at arm's house. So, the house arm in order width each 3 cm to the left and right," he explained
Siwe also dismantle all-out body sector. Starting from deltabox, the trick to create one from fiberglass. Dimensions of course adjust the width of the swing-arm.
Likewise with the tank design that also made a little wild. "Let me add a frightening impression that I want to highlight," point out the open garage builder in the area of Jl. Soekarno-Hatta No.. 93, Probolinggo.
A perfect combination!
Streetfighter-style bikes usually also synonymous with added head lamp design and a model that has frightening. "Initially my thoughts to apply a small head lamp projector nan concise. But, on the way, seemed less match. Less comfortable with this projector head lamp," added artificial Ninja 250R.
After hunting on the internet, Siwe decided to pinch-owned Suzuki Hayabusa head lamp. If installed once wrote, would result is less interesting. So Siwe necessarily make shell made from fiber. Proffered design lines deliberately tailored to the new look.
Have a cool design, the shell is also inserted a small lamp sein. This indicates that Siwe also consider the element of safety riding.
DATA MODIFICATION
Front tire: 120/70-17 Michelin
Rear tire: 190/50-17 Michelin
Front rim: Yamaha R1 3.5 inches
Rear rim: 6.5-inch Yamaha R1
Airs next: Upside down Yamaha R1
Sok back: Suzuki GSX600
Head lamp: Hayabusa
Gear: Vortex
Muffler: Nobi
Thursday, November 4, 2010
MODIFIKASI Yamaha Mio 2009
MODIFIKASI Yamaha Mio 2009
Generally, low rider theme engine modifications typically performed with a classical style and color tend to be dark. But by Ferdy Fristyansjah even out the grip. Because of Yamaha Mio was actually appear more fresh and brought the airbrush patterned Spiderman
"If the classic style've typically seen. I'd like to skubek low rider is bright. Incidentally, I like the color blue and red are so typical of Spiderman. I'll look okay on the road, "said resident Jl. H. Batong III, West Cilandak, South Jakarta.
To realize all of that, Ferdy helped Rini and home modifications retainer Sutrisno F-16 at. HOS. Cokroaminoto, No. 16, Ciledug, Tangerang. Incidentally the place is also available variations of supporting Latin American-style motorcycle.
One character is implementation of the Z-bar handlebars custom models that plug in bracket product variations. For harmonization, the center of the handlebars equipped speedometer Yamaha Fino with the addition of ornaments two large headlights. So within that area too vacant baseball empty alias.
"Then the front foot by installation sokbreker adjustable upside down front variations. Just let me look features low rider, width and height adjust character sokbreker reset low rider bike today, "said Ferdy.
Nah gambot contrived to miss the front wheel by placing a round rubber Swallow brand 100/80-ring size 14 inches. Tires that fit aluminum rim combined with braided fingers tilted in the direction of tire rotation.
Then for the middle sector, Ferdy only rely on custom footrests which ends can be opened wider. And still on that part, seat cuted low model that is aligned with the back rest of the stirrup iron chromed.
On the back of the earrings back about 10 cm are also given proper. This time utilized by applying sepatbor tread rear tires sized 120/90-14 Swallow.
And that makes it very viscous mounts a typical low-rider, please refer to the model exhaust already installed. Discharge form was almost unanimous, aka half-circle, the most predominant form seen in the rear silencers. Sip really tuh exhaust.
DATA MODIFICATION
Winshild: Yamaha Fino
Kick starter: zero
Spion: Variations
Footstep: Wave
Caliper: KTC
Digital speedometer: TMG
Generally, low rider theme engine modifications typically performed with a classical style and color tend to be dark. But by Ferdy Fristyansjah even out the grip. Because of Yamaha Mio was actually appear more fresh and brought the airbrush patterned Spiderman
"If the classic style've typically seen. I'd like to skubek low rider is bright. Incidentally, I like the color blue and red are so typical of Spiderman. I'll look okay on the road, "said resident Jl. H. Batong III, West Cilandak, South Jakarta.
To realize all of that, Ferdy helped Rini and home modifications retainer Sutrisno F-16 at. HOS. Cokroaminoto, No. 16, Ciledug, Tangerang. Incidentally the place is also available variations of supporting Latin American-style motorcycle.
One character is implementation of the Z-bar handlebars custom models that plug in bracket product variations. For harmonization, the center of the handlebars equipped speedometer Yamaha Fino with the addition of ornaments two large headlights. So within that area too vacant baseball empty alias.
"Then the front foot by installation sokbreker adjustable upside down front variations. Just let me look features low rider, width and height adjust character sokbreker reset low rider bike today, "said Ferdy.
Nah gambot contrived to miss the front wheel by placing a round rubber Swallow brand 100/80-ring size 14 inches. Tires that fit aluminum rim combined with braided fingers tilted in the direction of tire rotation.
Then for the middle sector, Ferdy only rely on custom footrests which ends can be opened wider. And still on that part, seat cuted low model that is aligned with the back rest of the stirrup iron chromed.
On the back of the earrings back about 10 cm are also given proper. This time utilized by applying sepatbor tread rear tires sized 120/90-14 Swallow.
And that makes it very viscous mounts a typical low-rider, please refer to the model exhaust already installed. Discharge form was almost unanimous, aka half-circle, the most predominant form seen in the rear silencers. Sip really tuh exhaust.
DATA MODIFICATION
Winshild: Yamaha Fino
Kick starter: zero
Spion: Variations
Footstep: Wave
Caliper: KTC
Digital speedometer: TMG
Tuesday, October 26, 2010
MODIFIKASI YAMAHA MIO SPORTY 2008
MODIFIKASI YAMAHA MIO SPORTY 2008
There are tricks or clever steps that try to spread this Jogja modifier origin. The goal to be the result of modifications to the Yamaha Mio looks remain harmonious. Harmonious in every part, not mutually oblique. Once philosophy
Recognizing that the debris in the legs are 'excessive', the body must follow. "To retreat, the rear wheels is enough reason to look long term," said Aji Rahmanto from garage Njiex's Custom (NC) this.
Aji make a retreat-retreat up to 35 cm. Custom rear rim is applied has a width of the palm 8 inches. "Long as it still fits if it's really quite extra-wide rear rim," added resident Jl. Urang times, Km 7, Yogyakarta.
After the rear wheel is installed, just deh Ajik, greeting familiar feel so strange appearance of the motor instead. "That's because the body is still the standard. So it looks oblique between the end of the body with the tire position," added the father of this child.
By reason was that, then the long tail again contrived. The addition is about 10 cm and tapered. "No damage to the framework. For just adding tail fiber spliced into the original body," added another Ajik
Choose a design such as stop lamp uses scraped from the Honda CBR150. "Hence, following the tail design. Kan is more tapered than have a Mio," he explained.
On the front is also done with a pinch of replacement Mio Soul. "More Soul sip lamp life because it is more convex. Bodi-added motor length became visible," beber man 29 this year.
Unfortunately the front and rear wheels are not or have not completed sepatbor. However, if they can be made and adjusted models, certainly will be more sip. Options exhaust feels not quite fit the theme.
DATA MODIFICATION
Front tire: 140/70-14 Tire Deli
Rear tire: 160/60-14 Dunlop
Front rim: 3.5 inches Custom
Rear rim: Custom 8x14 inches
Exhaust: Termignoni
NC: 0857-2933-4455
There are tricks or clever steps that try to spread this Jogja modifier origin. The goal to be the result of modifications to the Yamaha Mio looks remain harmonious. Harmonious in every part, not mutually oblique. Once philosophy
Recognizing that the debris in the legs are 'excessive', the body must follow. "To retreat, the rear wheels is enough reason to look long term," said Aji Rahmanto from garage Njiex's Custom (NC) this.
Aji make a retreat-retreat up to 35 cm. Custom rear rim is applied has a width of the palm 8 inches. "Long as it still fits if it's really quite extra-wide rear rim," added resident Jl. Urang times, Km 7, Yogyakarta.
After the rear wheel is installed, just deh Ajik, greeting familiar feel so strange appearance of the motor instead. "That's because the body is still the standard. So it looks oblique between the end of the body with the tire position," added the father of this child.
By reason was that, then the long tail again contrived. The addition is about 10 cm and tapered. "No damage to the framework. For just adding tail fiber spliced into the original body," added another Ajik
Choose a design such as stop lamp uses scraped from the Honda CBR150. "Hence, following the tail design. Kan is more tapered than have a Mio," he explained.
On the front is also done with a pinch of replacement Mio Soul. "More Soul sip lamp life because it is more convex. Bodi-added motor length became visible," beber man 29 this year.
Unfortunately the front and rear wheels are not or have not completed sepatbor. However, if they can be made and adjusted models, certainly will be more sip. Options exhaust feels not quite fit the theme.
DATA MODIFICATION
Front tire: 140/70-14 Tire Deli
Rear tire: 160/60-14 Dunlop
Front rim: 3.5 inches Custom
Rear rim: Custom 8x14 inches
Exhaust: Termignoni
NC: 0857-2933-4455
Friday, October 22, 2010
SPESIFIKASI Skutik Yamaha BW 125
SPESIFIKASI Skutik Yamaha BW 125
Yamaha BW skutik Had this come to Indonesia, he would have preferred even though the price a little high because of superior technology. Yamaha principal parties announced that the bike would land in England, the end of this April.
Motor city commuter machine is equipped with a capacity of 124 cc, four-stroke, with electronic fuel injection system and cooled engine. Injection system was able to reduce emissions and efficient in terms of fuel usage.
"Big, wide, and both wheels wearing 12-inch sizes. This ensures comfort on the highway, even run over gravel or when traction is reduced slightly. Stability is good, good traction and comfortable ride make this skutik easy to maneuver," so the statement from Yamaha Japan.
BW 125 is very comfortable to wear tandem. It was designed for the future, has a redesigned instrument panel, and trunk to put the helmet. BW 125 is marketed in combination with black and metallic white color.
Want to know the price? To the British, BW 2499 priced £ 125 or USD 34.4 million and already include tax.
Capacity of 125 cc V4 engine air cooling with a blower to cool the engine as the Honda vario, use 2 exhaust in order to maximize the power that comes out of the machine. Who deserves thumbs up is the system is not burner again but has embraced the conventional injection system, this is clearly the most advanced technology than other automatic scooter in Indonesia that still use carburetors. So the Yamaha pair of 16-bit on the engine ECU 125 BWS.
Full specs:
* Engine 4-stroke, water-cooled (fan assist), SOHC, 4-valve
* Displacement 125 cc
* Bore and Stroke 52.4 x 57.9mm
* Compression Ratio 10: 1
* Maximum Torque 1.0 kg-m (7 ft-lb.) @ 6,000 rpm
* Fuel Delivery 24mm throttle body fuel injection
* Lubrication Wet sump
* Ignition TCI / Electric Start
* Fully Automatic Transmission V-belt
* Suspension (Front) 27mm fork
* Suspension (Rear) Dual shock unit swingarm
* Brakes (Front) 220mm disc
* Brakes (Rear) Drum
* Tires (Front) 120/70-12
* Tires (Rear) 130/70-12
* Length 1.910 mm (75.2 ")
* Width 765mm (30.1 ")
* Height 1.112 mm (43.8 ")
* Wheelbase 1.290 mm (50.8 ")
* Ground Clearance 125mm (4.9 ")
* Seat Height 780mm (30.7 ")
* Dry Weight 113kg (248.6lb)
* Fuel Capacity 6 liters (1.3 Imp. Gal.)
* Wet Weight 122 kg (268.4 lb)
Yamaha BW skutik Had this come to Indonesia, he would have preferred even though the price a little high because of superior technology. Yamaha principal parties announced that the bike would land in England, the end of this April.
Motor city commuter machine is equipped with a capacity of 124 cc, four-stroke, with electronic fuel injection system and cooled engine. Injection system was able to reduce emissions and efficient in terms of fuel usage.
"Big, wide, and both wheels wearing 12-inch sizes. This ensures comfort on the highway, even run over gravel or when traction is reduced slightly. Stability is good, good traction and comfortable ride make this skutik easy to maneuver," so the statement from Yamaha Japan.
BW 125 is very comfortable to wear tandem. It was designed for the future, has a redesigned instrument panel, and trunk to put the helmet. BW 125 is marketed in combination with black and metallic white color.
Want to know the price? To the British, BW 2499 priced £ 125 or USD 34.4 million and already include tax.
Capacity of 125 cc V4 engine air cooling with a blower to cool the engine as the Honda vario, use 2 exhaust in order to maximize the power that comes out of the machine. Who deserves thumbs up is the system is not burner again but has embraced the conventional injection system, this is clearly the most advanced technology than other automatic scooter in Indonesia that still use carburetors. So the Yamaha pair of 16-bit on the engine ECU 125 BWS.
Full specs:
* Engine 4-stroke, water-cooled (fan assist), SOHC, 4-valve
* Displacement 125 cc
* Bore and Stroke 52.4 x 57.9mm
* Compression Ratio 10: 1
* Maximum Torque 1.0 kg-m (7 ft-lb.) @ 6,000 rpm
* Fuel Delivery 24mm throttle body fuel injection
* Lubrication Wet sump
* Ignition TCI / Electric Start
* Fully Automatic Transmission V-belt
* Suspension (Front) 27mm fork
* Suspension (Rear) Dual shock unit swingarm
* Brakes (Front) 220mm disc
* Brakes (Rear) Drum
* Tires (Front) 120/70-12
* Tires (Rear) 130/70-12
* Length 1.910 mm (75.2 ")
* Width 765mm (30.1 ")
* Height 1.112 mm (43.8 ")
* Wheelbase 1.290 mm (50.8 ")
* Ground Clearance 125mm (4.9 ")
* Seat Height 780mm (30.7 ")
* Dry Weight 113kg (248.6lb)
* Fuel Capacity 6 liters (1.3 Imp. Gal.)
* Wet Weight 122 kg (268.4 lb)
Friday, October 15, 2010
MODIFIKASI Yamaha Mio 2004 | LOW RIDER NEVER DIE
MODIFIKASI Yamaha Mio 2004 | LOW RIDER NEVER DIE
Low riders are proven to be one of style is quite timeless modif make skubek. Fans never subsided. Including Ikhya Ulumuddin, bikers Cikarang, West Java.
Grade 3 SMU 1 Sukatani, Cikarang is manifest interest in modifications to the Yamaha Mio 2004 flagship.
"The idea and design to make motor like this all from me. The friends helped build the club from Retroholic Cikarang (RHC). I also happen to its members, "honest.
To reinforce the impression of low rider, as usual, the most dominant change is in the legs. Custom rims and tires Toyota Supra 185/55X14 size, so the choice. Sure to outsmart the engine mounting design which is adjusted in length. "tolerable harmonious, mounted behind a Jupiter MX pretentious," he explained.
Scroll to about the design of the handlebars. The guy who used to be called Ulum this, choose the style Jap's style, combined headlight mere puppet in the front.
One of the aesthetic power of choice is a matter of election Ulum skubek flagshipscreen for this. "More colors taken from the Suzuki Swift. Because I wanted to see the calm motor, "continued the man who also boned this calm.
DATA MODIFICATION
Handlebars: Variations
Speedometer: zero
Muffler: Custom
Tires Front: 120/70 Swallow
Front rim: 5.5 inches Custom
Body paint: Burgundy Pearl
Low riders are proven to be one of style is quite timeless modif make skubek. Fans never subsided. Including Ikhya Ulumuddin, bikers Cikarang, West Java.
Grade 3 SMU 1 Sukatani, Cikarang is manifest interest in modifications to the Yamaha Mio 2004 flagship.
"The idea and design to make motor like this all from me. The friends helped build the club from Retroholic Cikarang (RHC). I also happen to its members, "honest.
To reinforce the impression of low rider, as usual, the most dominant change is in the legs. Custom rims and tires Toyota Supra 185/55X14 size, so the choice. Sure to outsmart the engine mounting design which is adjusted in length. "tolerable harmonious, mounted behind a Jupiter MX pretentious," he explained.
Scroll to about the design of the handlebars. The guy who used to be called Ulum this, choose the style Jap's style, combined headlight mere puppet in the front.
One of the aesthetic power of choice is a matter of election Ulum skubek flagshipscreen for this. "More colors taken from the Suzuki Swift. Because I wanted to see the calm motor, "continued the man who also boned this calm.
DATA MODIFICATION
Handlebars: Variations
Speedometer: zero
Muffler: Custom
Tires Front: 120/70 Swallow
Front rim: 5.5 inches Custom
Body paint: Burgundy Pearl
Wednesday, October 13, 2010
MODIFIKASI YAMAHA MIO 2009
MODIFIKASI YAMAHA MIO 2009
Before the 2010 MotoGP series rolling, know it is a new participant follow-up register. If you are known by the name of Rizla Suzuki team, now there Rizla Yamaha. Eits .. wait a minute, this new team is only there for the region, Central Java and surrounding areas
Is Handoyo Sutiono which have a tantrum. "The intention would make a racing style to any color choice, eh kepilih have ended up Rizla . Gak anything even though it was originally a Suzuki," said Sin-Sin, calling daily.
Indeed, for the affairs of the body, doi referring to the model mounts the MotoGP riders, especially for matters tail. "The model that pointed to a full square shape is traced from the concept of racing because it's perceived fit with the theme of the beginning was," added the man who is still single.
Behind the sharp-paced form of course also had to be balanced on the other. For example, the front. "The concept also made tapered front and somewhat slightly wider than the original body," added Sin-Sin
As an actual vehicle or for daily use, then of course head lamp is still badly needed. New deh after making the appropriate design, the main lights of the famous Jupiter-Z called the owl was deemed fit to fill this section.
All workmanship is to use fiberglass body. "Let more concept few side fins made to support the racing theme was," said skipper workshops Utomo Motor (UM) on Jl. Maj. Sutoyo, No. 1, Purworejo, Central Java.
But, unfortunately the sort of extra frame in the middle of the pipe 2 inches even so annoying!
DATA MODIFICATION
Front tire: 90/80-14 FDR
Rear tire: 120/70-14 FDR
Rims: Ride It
Airs next: X Speed
Sok back: YSS
UM: 0852-9285-1111
Before the 2010 MotoGP series rolling, know it is a new participant follow-up register. If you are known by the name of Rizla Suzuki team, now there Rizla Yamaha. Eits .. wait a minute, this new team is only there for the region, Central Java and surrounding areas
Is Handoyo Sutiono which have a tantrum. "The intention would make a racing style to any color choice, eh kepilih have ended up Rizla . Gak anything even though it was originally a Suzuki," said Sin-Sin, calling daily.
Indeed, for the affairs of the body, doi referring to the model mounts the MotoGP riders, especially for matters tail. "The model that pointed to a full square shape is traced from the concept of racing because it's perceived fit with the theme of the beginning was," added the man who is still single.
Behind the sharp-paced form of course also had to be balanced on the other. For example, the front. "The concept also made tapered front and somewhat slightly wider than the original body," added Sin-Sin
As an actual vehicle or for daily use, then of course head lamp is still badly needed. New deh after making the appropriate design, the main lights of the famous Jupiter-Z called the owl was deemed fit to fill this section.
All workmanship is to use fiberglass body. "Let more concept few side fins made to support the racing theme was," said skipper workshops Utomo Motor (UM) on Jl. Maj. Sutoyo, No. 1, Purworejo, Central Java.
But, unfortunately the sort of extra frame in the middle of the pipe 2 inches even so annoying!
DATA MODIFICATION
Front tire: 90/80-14 FDR
Rear tire: 120/70-14 FDR
Rims: Ride It
Airs next: X Speed
Sok back: YSS
UM: 0852-9285-1111
Tuesday, October 12, 2010
MODIFIKASI Yamaha Fino
MODIFIKASI Yamaha Fino
Last weekend, in Bandung, West Java, Yamaha competition Cuzztomatic 3 series was held with participants from regions I (Sumatra, Kalimantan, Jakarta, Banten and West Java). The contest is finally set a 2008 Yamaha Mio Soul alteration Budi "Big" Rahmanto as the winner.
On this scooter, the senior modifier offers a new concept. Extra wide rear wheel axle with no rewind. During this time, other modifiers often pegged to the concept that the machine must be backed with large wheels.
Kok, can not rewind the wheel axis? Here Big try shifting the position of the engine to the left to 8 cm. This shift makes the handle of a standard engine (engine mounting) unused. Instead, "Created new handle with the shape and size to follow the original model," said the man who hung on H Street Mugeni No. 1, Pisangan, East Jakarta, this.
The shape and frame construction have also been changed completely, the impact of the machine being moved. If you still use the original, Big words, the carburettor will be stuck. Therefore, bone left redesigned.
Big is very keen to use a custom body that resembles Fino. These designs, he said, perfectly suited to the hot rod theme. Only, the front headlights similar to the classical model of the competitors. Hence, when the contest, the lights Honda Scoopy also placed on the motor to reinforce the difference
Last weekend, in Bandung, West Java, Yamaha competition Cuzztomatic 3 series was held with participants from regions I (Sumatra, Kalimantan, Jakarta, Banten and West Java). The contest is finally set a 2008 Yamaha Mio Soul alteration Budi "Big" Rahmanto as the winner.
On this scooter, the senior modifier offers a new concept. Extra wide rear wheel axle with no rewind. During this time, other modifiers often pegged to the concept that the machine must be backed with large wheels.
Kok, can not rewind the wheel axis? Here Big try shifting the position of the engine to the left to 8 cm. This shift makes the handle of a standard engine (engine mounting) unused. Instead, "Created new handle with the shape and size to follow the original model," said the man who hung on H Street Mugeni No. 1, Pisangan, East Jakarta, this.
The shape and frame construction have also been changed completely, the impact of the machine being moved. If you still use the original, Big words, the carburettor will be stuck. Therefore, bone left redesigned.
Big is very keen to use a custom body that resembles Fino. These designs, he said, perfectly suited to the hot rod theme. Only, the front headlights similar to the classical model of the competitors. Hence, when the contest, the lights Honda Scoopy also placed on the motor to reinforce the difference
Sunday, October 10, 2010
SPESIFIKASI Yamaha Worldcrosser
SPESIFIKASI Yamaha Worldcrosser
Yamaha who took part in the Intermot Cologne Show 2010 in Germany made a surprise by presenting the concept of the latest generation of Super edge of the Tenere.
Yamaha's new star is raised before the world public as "Worldcrosser".
Designed by Design Iwata, a number of changes to appear on the motor cruiser bearing this tuning fork. Among them Akrapovic exhaust, cut-down single seats, race-style screen, and the tire model hoe.
Because it is still present in the form of concepts, then there is no plan from the Japanese manufacturer to enter into the production phase.
The presence of motor cruiser is believed to be due to Yamaha's "hot" for the success of the BMW R 1200 GS motorcycle touring that dominate the market. Then there is also a Triumph Tiger 1050, KTM Super Moto Touring SMT, and Ducati Multistrada 1200 is quite attractive European market.
Affairs power source, Super edge of the Tenere uses 2-cylinder DOHC engine with a capacity of 1199 cc liquid-cooled 4-stroke.
To be more confident in attacking European players, Yamaha also equip with fuel injection system on the YCC-T engine, Anti-lock braking features Brake System (ABS), and monoshock suspension.
Yamaha who took part in the Intermot Cologne Show 2010 in Germany made a surprise by presenting the concept of the latest generation of Super edge of the Tenere.
Yamaha's new star is raised before the world public as "Worldcrosser".
Designed by Design Iwata, a number of changes to appear on the motor cruiser bearing this tuning fork. Among them Akrapovic exhaust, cut-down single seats, race-style screen, and the tire model hoe.
Because it is still present in the form of concepts, then there is no plan from the Japanese manufacturer to enter into the production phase.
The presence of motor cruiser is believed to be due to Yamaha's "hot" for the success of the BMW R 1200 GS motorcycle touring that dominate the market. Then there is also a Triumph Tiger 1050, KTM Super Moto Touring SMT, and Ducati Multistrada 1200 is quite attractive European market.
Affairs power source, Super edge of the Tenere uses 2-cylinder DOHC engine with a capacity of 1199 cc liquid-cooled 4-stroke.
To be more confident in attacking European players, Yamaha also equip with fuel injection system on the YCC-T engine, Anti-lock braking features Brake System (ABS), and monoshock suspension.
MODIFIKASI Yamaha V-Max | Tampil Lebih Modis Berkat Hermes
MODIFIKASI Yamaha V-Max | Tampil Lebih Modis Berkat Hermes
Not just car manufacturers who could hold the world of fashion, but also motorcycles, aka motorcycle.
Yamaha recently introduced its collaboration with world renowned fashion brand, Hermes. This cooperation is manifested into the V-Max.
Yamaha V-Max which has performed so stylish cool transformed by Hermes with its component parts are wrapped in leather.
Yamaha recently introduced skin dibaluti moge collaboration with fashion house Hermes, which they christened the V-MAX. Hermes, based in France is not new in the world of two-wheel vehicles and have established 180 years ago that started from a saddle horse.
Hermes task in the V-MAX is covered moge with some of the best ingredients the skin. This idea, according to Yamaha and Hermes to strengthen the lines of a unique object as emotional strength.
The part that is covered here that non-mechanical, like a tank, seat, mudguard, front light until discharge silencer and grip. Finishing Touches also performed on similar materials chrome on glass, instrument panel and the exhaust.
Work Yamaha and Hermes is not the first with V-MAX this. Previously, exactly 15 years ago they had worked on the project seprupa by Virago.
Among redesigning the cylinder head and cam timing so that the flow of power is more subtle than the Multistrada 1200. There is also a change in angle valve engine design that refers to 1198.
Reworked the innards Diavel Multistrada that grafted onto a stock that's enough to hit the V-Max? Wait a minute! Because Yamaha has a capital that is not lightly to be conquered.
If Ducati claims Diavel capable of producing 162 bhp power, then the V-max power maskimalnya can pass in 197 bhp. Whereas V-Max weight reached 310 kg while Diavel only 207 kg.
V-Max 1679 cc V4 engine wear 4-valves per cylinder and equipped with the YCC-I for the intakes and YCC-T fly-by-wire priced 300 million more.
Carbon Fiber has long changed from THE material for light weight racing applications as well as high tech anything from mountain bikes to Aircraft and spaceships. A material so strong and light That 'there is virtually no competition for it. In most applications form and looks are secondary to the function - it being super light weight.
For example, the buffalo leather-coated engine, the tank, seat, mudguard, lamp cover, exhaust silencers, and grip are all covered with high-grade leather.
"We want to combine the engine and the skin in order to fulfill the dream of every motorcycle rider," wrote the official broadcast as reported from Motorcyclenews Yamaha, Sunday (10/10/2010).
In order not to appear too "bleak" due to the effects of skin colors are dark, V-Max Hermes is also covered with chrome in some parts such as panel meters and exhaust.
There are no plans to make the Yamaha V-Max Hermes as a mass product. And this bike is only exhibited in the arena Intermot Cologne Show 2010 in Germany.
Not just car manufacturers who could hold the world of fashion, but also motorcycles, aka motorcycle.
Yamaha recently introduced its collaboration with world renowned fashion brand, Hermes. This cooperation is manifested into the V-Max.
Yamaha V-Max which has performed so stylish cool transformed by Hermes with its component parts are wrapped in leather.
Yamaha recently introduced skin dibaluti moge collaboration with fashion house Hermes, which they christened the V-MAX. Hermes, based in France is not new in the world of two-wheel vehicles and have established 180 years ago that started from a saddle horse.
Hermes task in the V-MAX is covered moge with some of the best ingredients the skin. This idea, according to Yamaha and Hermes to strengthen the lines of a unique object as emotional strength.
The part that is covered here that non-mechanical, like a tank, seat, mudguard, front light until discharge silencer and grip. Finishing Touches also performed on similar materials chrome on glass, instrument panel and the exhaust.
Work Yamaha and Hermes is not the first with V-MAX this. Previously, exactly 15 years ago they had worked on the project seprupa by Virago.
Among redesigning the cylinder head and cam timing so that the flow of power is more subtle than the Multistrada 1200. There is also a change in angle valve engine design that refers to 1198.
Reworked the innards Diavel Multistrada that grafted onto a stock that's enough to hit the V-Max? Wait a minute! Because Yamaha has a capital that is not lightly to be conquered.
If Ducati claims Diavel capable of producing 162 bhp power, then the V-max power maskimalnya can pass in 197 bhp. Whereas V-Max weight reached 310 kg while Diavel only 207 kg.
V-Max 1679 cc V4 engine wear 4-valves per cylinder and equipped with the YCC-I for the intakes and YCC-T fly-by-wire priced 300 million more.
Carbon Fiber has long changed from THE material for light weight racing applications as well as high tech anything from mountain bikes to Aircraft and spaceships. A material so strong and light That 'there is virtually no competition for it. In most applications form and looks are secondary to the function - it being super light weight.
For example, the buffalo leather-coated engine, the tank, seat, mudguard, lamp cover, exhaust silencers, and grip are all covered with high-grade leather.
"We want to combine the engine and the skin in order to fulfill the dream of every motorcycle rider," wrote the official broadcast as reported from Motorcyclenews Yamaha, Sunday (10/10/2010).
In order not to appear too "bleak" due to the effects of skin colors are dark, V-Max Hermes is also covered with chrome in some parts such as panel meters and exhaust.
There are no plans to make the Yamaha V-Max Hermes as a mass product. And this bike is only exhibited in the arena Intermot Cologne Show 2010 in Germany.
Thursday, October 7, 2010
MODIFIKASI Yamaha Mio 07
MODIFIKASI Yamaha Mio 07
Spoiled correct in Perum Delta Dwi Sari, Sidoarjo. In his new age 10 years she can gift Mio. Did not last long, low rider also participated epidemic spread of this sassy girl.
This time he asked hang out modif low rider girl really impressed. Fortunately Hendro from Anugerah Motor in the region Kedung Asem, Surabaya understand the purpose Dwi.
Changes in body color on heavy foundation conceptualized Barbie Spieshecker purple color, the creation Peanut Mulyosari Body Painting in the region, Surabaya. Upgrade body sector also performed installation Fino head lamp, side by side handlebar steering and visor X-1.
Okay have a low rider grip. Tin rim escorted footprints 5'-14 and 7'-14 and the drum orsi, wrapped around 130/70-14 and 150/70-14 Swallow. Front triangle must be special ordered, with the axis 25 cm.
So is the engine mounting bracket 15 cm, cut the left side bushing 4 cm, for the rear wheel is symmetrical with the front wheels. Sok still use old-fashioned rear double mounted, areca nut of Ride It was supposed to make Jupiter along 28 cm.
To that end, the bottom bracket was redesigned model of parallel clamps, as well as the bracket on it. "Details, bottom bracket quasi knock down models use the help of two screws penetrate raled CVT and upper bracket welded to the former patent holder a long time," said Hendro, adding CVT casing Nouvo-Z and exhaust Password. | Pid
Modif spec:
Sok back: Ride It Jupiter, Stang steering: X-1, Visor: X-1, Speedometer: X-1, Spion: Variation, Rims: 5'-14 & 7'-14, Tires: 130/70-14 Swallow & 150/70-14, Triangle: Custom 25 cm, Muffler: Password, Filter: KTC, Handgrip: Moto Gp, brake lever: Moto Gp
Spoiled correct in Perum Delta Dwi Sari, Sidoarjo. In his new age 10 years she can gift Mio. Did not last long, low rider also participated epidemic spread of this sassy girl.
This time he asked hang out modif low rider girl really impressed. Fortunately Hendro from Anugerah Motor in the region Kedung Asem, Surabaya understand the purpose Dwi.
Changes in body color on heavy foundation conceptualized Barbie Spieshecker purple color, the creation Peanut Mulyosari Body Painting in the region, Surabaya. Upgrade body sector also performed installation Fino head lamp, side by side handlebar steering and visor X-1.
Okay have a low rider grip. Tin rim escorted footprints 5'-14 and 7'-14 and the drum orsi, wrapped around 130/70-14 and 150/70-14 Swallow. Front triangle must be special ordered, with the axis 25 cm.
So is the engine mounting bracket 15 cm, cut the left side bushing 4 cm, for the rear wheel is symmetrical with the front wheels. Sok still use old-fashioned rear double mounted, areca nut of Ride It was supposed to make Jupiter along 28 cm.
To that end, the bottom bracket was redesigned model of parallel clamps, as well as the bracket on it. "Details, bottom bracket quasi knock down models use the help of two screws penetrate raled CVT and upper bracket welded to the former patent holder a long time," said Hendro, adding CVT casing Nouvo-Z and exhaust Password. | Pid
Modif spec:
Sok back: Ride It Jupiter, Stang steering: X-1, Visor: X-1, Speedometer: X-1, Spion: Variation, Rims: 5'-14 & 7'-14, Tires: 130/70-14 Swallow & 150/70-14, Triangle: Custom 25 cm, Muffler: Password, Filter: KTC, Handgrip: Moto Gp, brake lever: Moto Gp
MODIFIKASI Yamaha Mio ‘07
MODIFIKASI Yamaha Mio ‘07
Fadhil really understand the trend of racing style, doi not playing games and do not bear application. Supported also by modifiers that are gape affairs racing style. "It took 3 months to find a concept," said owner Budhienk Modified hermitage.
Budi, skipper Budhienk stripped Modified total body and carry the front cover of creatived Nouvo. "In order somewhat ducked the axis order komstir cut 5 cm," said Budi. Order to participate coaked seem alluring. Bodi stern hull is designed with an additional number ama trail bike.
In a modification, builder of Venus Customized it brought the concept of racing look. It is as against the current, while in East Java again fever modification drag force and low-rider look.
Although the renovation is done Budi on Yamaha Mio 2007 limited fashion, many racing ornament attached. Most notably, these two types of slick tire wear (without development).
Then the front suspension that dipermak models upside down so that it becomes longer and greater. Perhaps this skubek first rooster made in Sidoarjo. In fact, according to Budi, soknya it yourself using a variety of custom Mio. "Beneath still use a Mio, being on such a condom wrapped with 2 inch pipe. For chromed finishing it," he said.
Motor racing so close to the display, on the deck of the middle frame made stabilizer. ''Only limited to the display, baseball functions like in racing,''the light of Budi.
The back also overhauled. As monosok, have MX affixed to the Mio. Jok is a custom order to save the battery so that people think baseball is the battery.
But is not retro body alteration is interesting in this Syarifuddin Ivan Mio property. As we look to the wheels, rims display used by Ivan is very unique. "For children car, I was sort of crazy wear this compe Enkei rims," said Ivan
Opinion rada extreme but it does have a point. Because of this rim is one of the collectors item for the retro car community. Rare and classy.
"So when I cut off and a bit of their custom on shaking his head," added owner Hotrider shop on Jl. Greater Middle Reef, No. 15, Cinere, South Jakarta. Even many fans of the retro cars to protest what he had done this.
However, Ivan had a reason to do so. "Fino a classic body views and unique it must also be balanced with the right rim. If just the fingers were still used to it," added the man was 46 years.
According to him, the crossbar or the development of the rim is also rada round Fino very fit body which is also designed rounded or rounded earlier. "So there is harmony between body and wheels," added the man who also likes photography and design. Many people also call this rim with the rim starfruit because crossbar model earlier.
Originally rim has a width of 6 inches. "But, for the future must be reduced again in order to look more celong," added the father of 3 children. Because it is a reduction in the width of the palm of the front wheels by means dibubut so that now only 4 inches. As for the rear stick with its original width.
To put it kind of put Ivan spacer to stick the wheel bolts. "That we make use of aluminum thickness of 2 cm attached to the original drum," he said.
In order to create the look of the motor in accordance with the concept, hollow cover model constrained CVT (add more) I'll look excited. Budi this bold step has a great risk when used for daily. Because the CVT should be free of dust, oil, and water. But, once again, Budi want to show the handiwork of net Mio. Hence, many parts are chromed.
Rear axle was also forced into retreat. "But, for to pursue the effects of low rider and machine can be set so that the position of center with the body," beber man who did a lot of extreme modification in this workshop. Pullback is not too far away, there's only the addition of approximately 8 cm.
The legs Budi these creations can be alternative to stimulate the hypercrea by putting forward the following quasi front drum rear processed turner. "If sokbekern kufriskan front drum models are cross-owned Jupie that design Trusty model," said a former high school alumnus in Sidoarjo.
Racing style is more attached to the color and so the results cool smooth and evenly, before the body coated with epoxy paint brands Autolux. Next carried white paint Galaxy's next theme motif Castrol. Chand
Spec modif
Sok DPN: custom,, Sok BLKG: YSS nitro, DPN calipers: Brembo, disc DPN: Kitaco, drum DPN: Trusty, rim: DBS, BAN: Dragblaster, Vizard DPN: Nouvo, COVER DPN: Mio, modifier: Modified Budhienk Budi , Tenggulunan, Prohibition, Sidoarjo. Phone 085730700001 / 031 77333301.
Fadhil really understand the trend of racing style, doi not playing games and do not bear application. Supported also by modifiers that are gape affairs racing style. "It took 3 months to find a concept," said owner Budhienk Modified hermitage.
Budi, skipper Budhienk stripped Modified total body and carry the front cover of creatived Nouvo. "In order somewhat ducked the axis order komstir cut 5 cm," said Budi. Order to participate coaked seem alluring. Bodi stern hull is designed with an additional number ama trail bike.
In a modification, builder of Venus Customized it brought the concept of racing look. It is as against the current, while in East Java again fever modification drag force and low-rider look.
Although the renovation is done Budi on Yamaha Mio 2007 limited fashion, many racing ornament attached. Most notably, these two types of slick tire wear (without development).
Then the front suspension that dipermak models upside down so that it becomes longer and greater. Perhaps this skubek first rooster made in Sidoarjo. In fact, according to Budi, soknya it yourself using a variety of custom Mio. "Beneath still use a Mio, being on such a condom wrapped with 2 inch pipe. For chromed finishing it," he said.
Motor racing so close to the display, on the deck of the middle frame made stabilizer. ''Only limited to the display, baseball functions like in racing,''the light of Budi.
The back also overhauled. As monosok, have MX affixed to the Mio. Jok is a custom order to save the battery so that people think baseball is the battery.
But is not retro body alteration is interesting in this Syarifuddin Ivan Mio property. As we look to the wheels, rims display used by Ivan is very unique. "For children car, I was sort of crazy wear this compe Enkei rims," said Ivan
Opinion rada extreme but it does have a point. Because of this rim is one of the collectors item for the retro car community. Rare and classy.
"So when I cut off and a bit of their custom on shaking his head," added owner Hotrider shop on Jl. Greater Middle Reef, No. 15, Cinere, South Jakarta. Even many fans of the retro cars to protest what he had done this.
However, Ivan had a reason to do so. "Fino a classic body views and unique it must also be balanced with the right rim. If just the fingers were still used to it," added the man was 46 years.
According to him, the crossbar or the development of the rim is also rada round Fino very fit body which is also designed rounded or rounded earlier. "So there is harmony between body and wheels," added the man who also likes photography and design. Many people also call this rim with the rim starfruit because crossbar model earlier.
Originally rim has a width of 6 inches. "But, for the future must be reduced again in order to look more celong," added the father of 3 children. Because it is a reduction in the width of the palm of the front wheels by means dibubut so that now only 4 inches. As for the rear stick with its original width.
To put it kind of put Ivan spacer to stick the wheel bolts. "That we make use of aluminum thickness of 2 cm attached to the original drum," he said.
In order to create the look of the motor in accordance with the concept, hollow cover model constrained CVT (add more) I'll look excited. Budi this bold step has a great risk when used for daily. Because the CVT should be free of dust, oil, and water. But, once again, Budi want to show the handiwork of net Mio. Hence, many parts are chromed.
Rear axle was also forced into retreat. "But, for to pursue the effects of low rider and machine can be set so that the position of center with the body," beber man who did a lot of extreme modification in this workshop. Pullback is not too far away, there's only the addition of approximately 8 cm.
The legs Budi these creations can be alternative to stimulate the hypercrea by putting forward the following quasi front drum rear processed turner. "If sokbekern kufriskan front drum models are cross-owned Jupie that design Trusty model," said a former high school alumnus in Sidoarjo.
Racing style is more attached to the color and so the results cool smooth and evenly, before the body coated with epoxy paint brands Autolux. Next carried white paint Galaxy's next theme motif Castrol. Chand
Spec modif
Sok DPN: custom,, Sok BLKG: YSS nitro, DPN calipers: Brembo, disc DPN: Kitaco, drum DPN: Trusty, rim: DBS, BAN: Dragblaster, Vizard DPN: Nouvo, COVER DPN: Mio, modifier: Modified Budhienk Budi , Tenggulunan, Prohibition, Sidoarjo. Phone 085730700001 / 031 77333301.
Tuesday, October 5, 2010
MODIFIKASI Yamaha Scorpio-Z
MODIFIKASI Yamaha Scorpio-Z
Often sail on the high seas does not mean making Miko delirious. Once reaching land one he thinks is his iron horse. Iron horse who has also overhauled as a form of love Miko.
"The bike belonged to a sailor and is built from two concepts. Suzuki GSX 600 and Ducati Street Fighter," open shop owners Tauco Custom modifications, Topo Goedel Atmodjo the contest Miko achieve their dreams.
And do not want to linger, Topo who always liked this quirky style was immediately working. Yamaha Scorpio Z body-alerts in 2008 which is owned Miko modifi immediately without mercy.
In the hands of Topo, the body of the scorpion was stripped and replaced with a new body that he made a custom of material measuring 0.8 mm galvanized plate that is has become a mainstay for a long time.
"Tank-inspired GSX 600, while the rear body section is inspired from Street Fighter Ducati which is then combined with the delta box 696 Ducati-style tubular style," he said.
With these designs, by naked eyes watered motor maroon paint with a headlamp of 2 foglamp car was immediately seen very aggressive with the groove firmly attached from the front to the stern.
Done up there? Apparently not. Hand founding fathers in the workshop number coll , South Jakarta is still just itching to mess up the iron horse is owned by the sailor.
Because in the eyes of native men Sragen, Central Java, stocky body Scorpio-Z is still felt to be inappropriate if not supported by the legs which is also muscular.
For that, a set of shock-owned Suzuki GSX 400 he immediately prepared to be fitted into the legs of the scorpion. Consequently, the look of the Scorpio-Z's Miko is also directly felt grim.
Moreover, a large enough shock is then paired with sporty rims also from the Suzuki GSX 400 that has been wrapped Battlax tires sized 120/70/17 front and 150/60/17 in the rear.
"Now, Scorpio-Z also became more in line with the spirit and the wishes of the owner who likes to style," he said.
Often sail on the high seas does not mean making Miko delirious. Once reaching land one he thinks is his iron horse. Iron horse who has also overhauled as a form of love Miko.
"The bike belonged to a sailor and is built from two concepts. Suzuki GSX 600 and Ducati Street Fighter," open shop owners Tauco Custom modifications, Topo Goedel Atmodjo the contest Miko achieve their dreams.
And do not want to linger, Topo who always liked this quirky style was immediately working. Yamaha Scorpio Z body-alerts in 2008 which is owned Miko modifi immediately without mercy.
In the hands of Topo, the body of the scorpion was stripped and replaced with a new body that he made a custom of material measuring 0.8 mm galvanized plate that is has become a mainstay for a long time.
"Tank-inspired GSX 600, while the rear body section is inspired from Street Fighter Ducati which is then combined with the delta box 696 Ducati-style tubular style," he said.
With these designs, by naked eyes watered motor maroon paint with a headlamp of 2 foglamp car was immediately seen very aggressive with the groove firmly attached from the front to the stern.
Done up there? Apparently not. Hand founding fathers in the workshop number coll , South Jakarta is still just itching to mess up the iron horse is owned by the sailor.
Because in the eyes of native men Sragen, Central Java, stocky body Scorpio-Z is still felt to be inappropriate if not supported by the legs which is also muscular.
For that, a set of shock-owned Suzuki GSX 400 he immediately prepared to be fitted into the legs of the scorpion. Consequently, the look of the Scorpio-Z's Miko is also directly felt grim.
Moreover, a large enough shock is then paired with sporty rims also from the Suzuki GSX 400 that has been wrapped Battlax tires sized 120/70/17 front and 150/60/17 in the rear.
"Now, Scorpio-Z also became more in line with the spirit and the wishes of the owner who likes to style," he said.
Sunday, October 3, 2010
MODIFIKASI YAMAHA SCORPIO 2005
Magetan city in East Java has a region which is famous up and down. Of course, modifications supermoto deemed most fitting for the nature of such earlier. Although it looks simple, but important functional.
"Moreover, this motor myself, so it should be used as a reference for those who come to shop," said Edi Purwanto, skipper Rosy Motor (RM), one shop and modifier variation of this region. Surely doi baseball want potential customers even blurred if you see a messy bike builder.
The changes, step by Edi is not too complicated. "Because I refuse to appear extreme, so it plays more tricks in choosing variations that are stuck. Anyway worthy and nice views," the story at length.
For customizing the process is done, also only slightly. Namely in the manufacture of gasoline tanks. "The model took the dirt bike-style design, but that we make themselves by using a metal plate," added the father of this child.
After the tank shape is obtained, then the seat is formed to follow. Again this must be taken from the seat of many stuck in the trail.
Meanwhile, for the affairs of the body, Edi simply buy from plastic materials trail which many in the market. "I select the model YZ, Yamaha created for you, fear'll reduce teasing people if we are using the body of another brand," he added.
Another requirement to show a true supermoto style front is a handsome shape. "The model is a lot of choices, use of waste or variation, the same thing anyway," SAIDEdi again.
But the name of selling, doi life upside-down variation of Thailand. Go to a real indeed again a lot of entry to Indonesia, including of course to fill in his shop window. Yes, all promotions are also right!
When Polecated about prices, direct Edi react. "To make a bike like this budget baseball more than Rp 10 million. And things stuck in the motor also has quite a lot of you know," promotion from the shop owner Jl. Raya Sarangan, Magetan this.
See, bener right?
DATA MODIFICATION
Front tire: 110/70-17 Swallow
Rear tire: Battlax 130/70-17
Rims: BarosMaster brakes: LHK
Muffler: Alexander
RM: 0813-3540-8866
Monday, September 27, 2010
MODIFIKASI Yamaha YZF-R1 LE
MODIFIKASI Yamaha YZF-R1 LE
After Valentino Rossi clinched his MotoGP world for the seventh time in the race at Sepang Circuit last week, certainly a lot of motor sport enthusiast who wants to look like a bike owned by The Doctor.
But for those who have more funds need not modify their bikes to match Yamaha's search numbered 46, because they could directly order the YZF-R1 LE.
However, this limited edition bike is not entirely the same as mounts Rossi who took him into the most prestigious motor racing champion in the world. The reason, YZF-R1 LE is not a motor racing, but the motor for highway, so that several devices adapted for use on the highway, such as mirrors, lights sein, headlights and taillights.
Likewise with the muffler. If Rossi's exhaust gas is only one hidden behind the seat. While the YZ-F R1 LE has two triangular exhaust that is placed on the side under the seat. In order not to exhaust heat on pillion, Yamaha provide security in the form of insulating plastic that was wrapped in black.
Do not be disappointed once, because it looked from the front or side, hang out is not much different motor racing driver with the birth of Urbino, Italy, that. Especially the design and style fairing. Fiat's name printed on it, also sponsors the Fiat Yamaha team, namely Petronas, also posted at the bottom of the fairing.
Besides style, other similar technology on this bike course referring to Rossi's motorcycle. So, if searched YZF-R1 LE it feels just like riding a bike numbered 46 was phenomenal. If it were so wait no more. Come search 1.000cc motor 6 speed transmission is on the highway, certainly a lot of eyes will glance at your ride.
Also the tank is not blue color motor
really like Rossi's, because the bottom of gas tank that intersect with a delta there is a kind of protective plastic box black.
Likewise with the muffler. If Rossi's exhaust gas is only one hidden behind the seat. While the YZ-F R1 LE has two triangular exhaust that is placed on the side under the seat. In order not to exhaust heat on pillion, Yamaha provide security in the form of insulating plastic material is wrapped in black.
Do not be disappointed once, because it looked from the front or side, hang out is not much different motor racing driver with the birth of Urbino, Italy, that. Especially the design and style fairin. Fiat's name printed on it, also sponsors the Fiat Yamaha team, namely Petronas, also posted at the bottom of the fairing.
Besides style, other similar technology on this bike course referring to Rossi's motorcycle. So, if search YZF-R1 LE it feels just like riding a bike numbered 46 was phenomenal. If it were so wait no more. Come Geber 1.000cc motor 6 speed transmission is on the highway, certainly a lot of eyes will glance at your ri
After Valentino Rossi clinched his MotoGP world for the seventh time in the race at Sepang Circuit last week, certainly a lot of motor sport enthusiast who wants to look like a bike owned by The Doctor.
But for those who have more funds need not modify their bikes to match Yamaha's search numbered 46, because they could directly order the YZF-R1 LE.
However, this limited edition bike is not entirely the same as mounts Rossi who took him into the most prestigious motor racing champion in the world. The reason, YZF-R1 LE is not a motor racing, but the motor for highway, so that several devices adapted for use on the highway, such as mirrors, lights sein, headlights and taillights.
Likewise with the muffler. If Rossi's exhaust gas is only one hidden behind the seat. While the YZ-F R1 LE has two triangular exhaust that is placed on the side under the seat. In order not to exhaust heat on pillion, Yamaha provide security in the form of insulating plastic that was wrapped in black.
Do not be disappointed once, because it looked from the front or side, hang out is not much different motor racing driver with the birth of Urbino, Italy, that. Especially the design and style fairing. Fiat's name printed on it, also sponsors the Fiat Yamaha team, namely Petronas, also posted at the bottom of the fairing.
Besides style, other similar technology on this bike course referring to Rossi's motorcycle. So, if searched YZF-R1 LE it feels just like riding a bike numbered 46 was phenomenal. If it were so wait no more. Come search 1.000cc motor 6 speed transmission is on the highway, certainly a lot of eyes will glance at your ride.
Also the tank is not blue color motor
really like Rossi's, because the bottom of gas tank that intersect with a delta there is a kind of protective plastic box black.
Likewise with the muffler. If Rossi's exhaust gas is only one hidden behind the seat. While the YZ-F R1 LE has two triangular exhaust that is placed on the side under the seat. In order not to exhaust heat on pillion, Yamaha provide security in the form of insulating plastic material is wrapped in black.
Do not be disappointed once, because it looked from the front or side, hang out is not much different motor racing driver with the birth of Urbino, Italy, that. Especially the design and style fairin. Fiat's name printed on it, also sponsors the Fiat Yamaha team, namely Petronas, also posted at the bottom of the fairing.
Besides style, other similar technology on this bike course referring to Rossi's motorcycle. So, if search YZF-R1 LE it feels just like riding a bike numbered 46 was phenomenal. If it were so wait no more. Come Geber 1.000cc motor 6 speed transmission is on the highway, certainly a lot of eyes will glance at your ri
MODIFIKASI Yamaha Mio Soul '07 Solo | MATIC EXTENDED BENGAWAN STYLE
MODIFIKASI Yamaha Mio Soul '07 Solo | MATIC EXTENDED BENGAWAN STYLE
Trend extended matic or often called by the layman with lowrider matic was not abandoned by the modilover. Even modilover and modifiers are also called Paris home city of Solo is also not want the responsibility of the work extended this to show detail matic body of work which involved serious tilled.
"Some parts cool again with fiberglass, although its fiber minimalist but the end result should cool," sure made Yamaha Mio Soul is usually addressed by this Bagyo.
Drived legs rim with tread Avanza 4.5 "and 6.5" in front and rear. Circumference 14 "is still a favorite for lovers of extended-matic, for front and rear tires chose FDR Swallow 140/80 in front and 160/70 at the rear.
The front legs are crammed by the double disc Ride It forced the modifier weld tube front sokbeker this variation with argon welding for adding new Brembo caliper bracket.
Detail of the rear foot fit with the concept when exhaust custom lowrider rolled curved with a pointed tip. Rear disc Ride It also is installed on the left close to the engine CVT. Spreads on body building, doi bold enough sectors with headlamp and stoplamp with fiber.
The most obvious is that the thickness of fiberglass headlamp sector was offset by variations in the car mirror. Finishing, paint cans selected Blinken clear red black and silver graphic according doi favorite color. DNR
Modif spec:
SOKBEKER DPN: Variations Custom, SOKBEKER BLK: monosok Satria FU, discs DPN / BLK: Ride It, rim DPN / BLK: Ex Avanza 4.5 "-14" / 6.5 "-14", DPN BAN: FDR 140/80-14, BLK TIRE: 160/70-14 Swallow, exhaust / handlebar: Custom Handmade, CAT / CLEAR: Blinken, modifier: Modified PSM. Jl. Sidorejo 01/XIII, Mojosongo, Solo
Trend extended matic or often called by the layman with lowrider matic was not abandoned by the modilover. Even modilover and modifiers are also called Paris home city of Solo is also not want the responsibility of the work extended this to show detail matic body of work which involved serious tilled.
"Some parts cool again with fiberglass, although its fiber minimalist but the end result should cool," sure made Yamaha Mio Soul is usually addressed by this Bagyo.
Drived legs rim with tread Avanza 4.5 "and 6.5" in front and rear. Circumference 14 "is still a favorite for lovers of extended-matic, for front and rear tires chose FDR Swallow 140/80 in front and 160/70 at the rear.
The front legs are crammed by the double disc Ride It forced the modifier weld tube front sokbeker this variation with argon welding for adding new Brembo caliper bracket.
Detail of the rear foot fit with the concept when exhaust custom lowrider rolled curved with a pointed tip. Rear disc Ride It also is installed on the left close to the engine CVT. Spreads on body building, doi bold enough sectors with headlamp and stoplamp with fiber.
The most obvious is that the thickness of fiberglass headlamp sector was offset by variations in the car mirror. Finishing, paint cans selected Blinken clear red black and silver graphic according doi favorite color. DNR
Modif spec:
SOKBEKER DPN: Variations Custom, SOKBEKER BLK: monosok Satria FU, discs DPN / BLK: Ride It, rim DPN / BLK: Ex Avanza 4.5 "-14" / 6.5 "-14", DPN BAN: FDR 140/80-14, BLK TIRE: 160/70-14 Swallow, exhaust / handlebar: Custom Handmade, CAT / CLEAR: Blinken, modifier: Modified PSM. Jl. Sidorejo 01/XIII, Mojosongo, Solo
MODIFIKASI Yamaha F1Z-R 96 | SOKBREKER REBAH DEMI KEKUATAN
MODIFIKASI Yamaha F1Z-R 96 | SOKBREKER REBAH DEMI KEKUATAN
Expertise risen from Deresan Krisdianto Thole, Yogyakarta is believed to zone in concocting gacoan Java engine used a special replica of adventure. Iwan Jaya Abadi kinds of Bojonegoro who oust Thole as executor.
Functional selection of the parts is more a priority to deal with extreme terrain. In the foot-leg is also non-negotiable for Thole. Kinds of use of quasi-complete with a triangle above the front bottom that applied from the YZ-85, dimensions 1.4 meters profitable for adventure.
Medium rear swing arm taken over from Kaze R. "But the indirect tide, the bridge was cut and connected with a profile similar 4 cm, to fit 215-16 and held the rim 90/100-16 Kenda tires," says Thole.
In addition to dilated, a point below the double bracket is made more advanced quasi 3 cm from the default. The assumption made bracket on the double quasi-forward, to find the point of double-strength sub-frame supporting a quasi-picked from 32 cm Double Action KYB it.
"So the position of quasi who relented until the fall, to maintain the strength of the framework," sure Thole who consider this part fracture-prone. Affairs of the use of the body selected from the YZ-85 and seting proportionately.
Regenerated tank holder, through the addition of a rectangular profile skeleton. Medium body sub-frame supporting the stern, made double knock down system model, relies on the swing arm pivot and additional skeleton supporting the tank. Section under the above machines are also increasingly dense, after buyed exhaust silincer shrimp model-Pang YY.
Sector wicketed front wheel rim profile and bandaged Kenda 80/90-19 185-19, centralized on YZ-85 drum Complete with front discs and calipers rear him. To master upgrade, use the KLX-150 front and rear Nissin congenital taken over from Knight-R. | Pid
Spec modif
Airs next: YZ-85, Sok back: KYB Double Action, Arm swing: Kaze, Master front: KLX-150, rear Master: Knight-R, Silincer: YY-Pang, Wheels: 185-19 & 215-16, Tires : Kenda 80/90-19 & 90/100-16, Tromol: YZ-85, Bodi set: YZ-85
Expertise risen from Deresan Krisdianto Thole, Yogyakarta is believed to zone in concocting gacoan Java engine used a special replica of adventure. Iwan Jaya Abadi kinds of Bojonegoro who oust Thole as executor.
Functional selection of the parts is more a priority to deal with extreme terrain. In the foot-leg is also non-negotiable for Thole. Kinds of use of quasi-complete with a triangle above the front bottom that applied from the YZ-85, dimensions 1.4 meters profitable for adventure.
Medium rear swing arm taken over from Kaze R. "But the indirect tide, the bridge was cut and connected with a profile similar 4 cm, to fit 215-16 and held the rim 90/100-16 Kenda tires," says Thole.
In addition to dilated, a point below the double bracket is made more advanced quasi 3 cm from the default. The assumption made bracket on the double quasi-forward, to find the point of double-strength sub-frame supporting a quasi-picked from 32 cm Double Action KYB it.
"So the position of quasi who relented until the fall, to maintain the strength of the framework," sure Thole who consider this part fracture-prone. Affairs of the use of the body selected from the YZ-85 and seting proportionately.
Regenerated tank holder, through the addition of a rectangular profile skeleton. Medium body sub-frame supporting the stern, made double knock down system model, relies on the swing arm pivot and additional skeleton supporting the tank. Section under the above machines are also increasingly dense, after buyed exhaust silincer shrimp model-Pang YY.
Sector wicketed front wheel rim profile and bandaged Kenda 80/90-19 185-19, centralized on YZ-85 drum Complete with front discs and calipers rear him. To master upgrade, use the KLX-150 front and rear Nissin congenital taken over from Knight-R. | Pid
Spec modif
Airs next: YZ-85, Sok back: KYB Double Action, Arm swing: Kaze, Master front: KLX-150, rear Master: Knight-R, Silincer: YY-Pang, Wheels: 185-19 & 215-16, Tires : Kenda 80/90-19 & 90/100-16, Tromol: YZ-85, Bodi set: YZ-85
Friday, September 24, 2010
MODIFIKASI YAMAHA MIO SPORTY 2005
MODIFIKASI YAMAHA MIO SPORTY 2005
Each 1 April, many people prepared to accept April Fool. It is customary to give a surprise to someone and the victim should not be complaining or angry. So also at the sight of this modification in Mio. It was really surprising because it is present in the new style with the perfect finishing plus rich detail and innovation.
"The project is 6 months should certainly be different and could surprise all readers Em-Plus," sure Diemaz Erland, skipper Diemaz Motor (DM), the creator of this phenomenal work.
To view this Diemaz British stream name the chopper style. Doi dare to name it after browsing the flow of the world on the internet. "Although this skubek, we make esktrem with form like that," he continued.
The entire frame is regenerated by using a variety of tubular pipe sizes. The largest diameter of 3 inches.
Finished to form the frame, just deh start Diemas mess with a very nicely detailed. For example, the form of a tiny tank that fits with the dimension Mio. "To use a small bottle of gasoline indicator stuck on the left side of the tank. The volume shows the existing conditions in the tank," said shop owner from Jl. Steel Kingdom, No. 89, Perumnas II, this Tangerang
Meanwhile the rear suspension customed by using waste per leaf in the car. "And then chromed to look neat and clean," said the father of two children.
Another unique thing is the starter system. "Using a car Carry and the way he plays is a kind of teeth that are placed in front of the tank," added Diemaz.
Blend chameleon purple and gold are also appropriate. Managed to create a memorable motor that extreme but still elegant and luxurious.
When viewing the first and not pay attention to detail had doubts whether this motor can work perfectly or not. Because it seems there is no exhaust that sticks in the back. Cook wear baseball motorcycle exhaust?
"Ha .. ha ... indeed many are curious, because now again trying to make a new virus that is muffler 2 in 1," the story of the many supported Diemaz Orchid Wahidin of this motor.
Investigate a calibaration, see doi combine sepatbor exhaust and rear. "So after the neck has been channeled into the body sepatbor, the model is quite small and thin holes," said a rich man odd these ideas.
There is also another new breakthrough. Namely, making a battery, kiprok and CDI in a plastic jar painted with the body and placed at the bottom frame. Boljug alias may also nih!
DATA MODIFICATION
Front tire: 110/90-16 KBF
Rear tire: 125/80-14 Bridgestone
Front rim: Da Xing 2.50x16
Rear rim: Custom 6x14 inches
Cat: De Beers
DM: 0856-1400-800
Each 1 April, many people prepared to accept April Fool. It is customary to give a surprise to someone and the victim should not be complaining or angry. So also at the sight of this modification in Mio. It was really surprising because it is present in the new style with the perfect finishing plus rich detail and innovation.
"The project is 6 months should certainly be different and could surprise all readers Em-Plus," sure Diemaz Erland, skipper Diemaz Motor (DM), the creator of this phenomenal work.
To view this Diemaz British stream name the chopper style. Doi dare to name it after browsing the flow of the world on the internet. "Although this skubek, we make esktrem with form like that," he continued.
The entire frame is regenerated by using a variety of tubular pipe sizes. The largest diameter of 3 inches.
Finished to form the frame, just deh start Diemas mess with a very nicely detailed. For example, the form of a tiny tank that fits with the dimension Mio. "To use a small bottle of gasoline indicator stuck on the left side of the tank. The volume shows the existing conditions in the tank," said shop owner from Jl. Steel Kingdom, No. 89, Perumnas II, this Tangerang
Meanwhile the rear suspension customed by using waste per leaf in the car. "And then chromed to look neat and clean," said the father of two children.
Another unique thing is the starter system. "Using a car Carry and the way he plays is a kind of teeth that are placed in front of the tank," added Diemaz.
Blend chameleon purple and gold are also appropriate. Managed to create a memorable motor that extreme but still elegant and luxurious.
When viewing the first and not pay attention to detail had doubts whether this motor can work perfectly or not. Because it seems there is no exhaust that sticks in the back. Cook wear baseball motorcycle exhaust?
"Ha .. ha ... indeed many are curious, because now again trying to make a new virus that is muffler 2 in 1," the story of the many supported Diemaz Orchid Wahidin of this motor.
Investigate a calibaration, see doi combine sepatbor exhaust and rear. "So after the neck has been channeled into the body sepatbor, the model is quite small and thin holes," said a rich man odd these ideas.
There is also another new breakthrough. Namely, making a battery, kiprok and CDI in a plastic jar painted with the body and placed at the bottom frame. Boljug alias may also nih!
DATA MODIFICATION
Front tire: 110/90-16 KBF
Rear tire: 125/80-14 Bridgestone
Front rim: Da Xing 2.50x16
Rear rim: Custom 6x14 inches
Cat: De Beers
DM: 0856-1400-800
Wednesday, September 22, 2010
MODIFIKASI YAMAHA V-IXION 2009
MODIFIKASI YAMAHA V-IXION 2009
The Yamaha V-Ixion result of this modification include unique. Kinds of mounts for the competition trail endurance test Endurance aka abroad. Motor claim Eling Mugi who gained popularity with home modifications Evolution Custom (EC) also dijajal extreme. Yogyakarta, Purwokerto route bejarak over 300 km each way. This means that more than 600 km round-trip.
"The owner of this bike is unique. She want to test the rear chassis and body construction. Again he was demented luggage rack, "slang addressed U'i kekeh modifier from this Purwokerto mendoan City.
True unique, let alone any motorcycle owner would baseball be named. see, mysterious or soap fame. You know, if you've hung out in the sacred books of the true biker is, will the famous a country,
More crazy again, the test is not alone. WJS piece seat style so rich, are forced to lift. reason ya, let me be stuck to her seat.
Technical artificial, U'i was not too complicated. Besides've katam about WJS, U'i live capture benchmark style. Modifier, who liked to wear shorts this, use the stop lights Honda CS-1 as a starting point. Just then, all customized designs and dimensions. "After the corner to see, just deh frame construction began contrived," said this father of two sons.
Rake angle more than 45 degrees. The material used as the framework is ¾-inch pipe. Under the cradle welded on the back deltabox. While the top end of the handle as well as rear lights
"Bone glued directly on the top of the original chassis located at the bottom of the tank directly to deltabox," added the modifier ngendon on Jl. Youth No. 709, Puwokerto this.
Construction was confirmed patent, so U'i sure strong. While electric welding on an additional order was also made without hesitation.
Though simple, but a modifier that used to play this chopper looks like the front of cool and slightly bloated. But the little problem, because the framework of a small V-Ixion. if imposed would be less good in design. Glossary words, lack matching, Bro!
Moreover U'i also retain the original deltabox. That motor still looks full and dense. Only, this skinny-boned boy add forms headlights handmade'll look forward in harmony with the overall harmonosasi. Sein also CS-1 is deliberately placed in front of the body.
Of specific NO EQUIPMENT DETAIL
Talk body, a modifier which makes the project more extreme motor has always been a hallmark of every artificial. That is, the detail and highlight the contours. Moreover, known as a modifier U'i super detail in the environment WJS (West Central Java Style).
So not be surprised if a man without a mustache is intentionally making body with full curves and distinct line. "Because the curves and lines can be created to accentuate the contours are obtained. That motor dynamic and have a characteristic look clear, "believes modifier that really understand the science of this design.
In addition to the strong side of the detail, U'i also dare to match color. Although the taste of regular cool motor using a darker color, U'i play with bright colors. Plus a few decorative figures and writings. At least, the impression still appear in the wild there. Stay in tune with the style of a true streetfighter wild.
DATA MODIFICATION
Front tire: Duro 110/70-17
Rear tire: 130/70-17 Duro
Rim: Sprint
Headlights: Variations
Taillights: CS-1
Handlebar: Clasps variations
Exhaust: Hand Made
EC: (0281) 621-790


The Yamaha V-Ixion result of this modification include unique. Kinds of mounts for the competition trail endurance test Endurance aka abroad. Motor claim Eling Mugi who gained popularity with home modifications Evolution Custom (EC) also dijajal extreme. Yogyakarta, Purwokerto route bejarak over 300 km each way. This means that more than 600 km round-trip.
"The owner of this bike is unique. She want to test the rear chassis and body construction. Again he was demented luggage rack, "slang addressed U'i kekeh modifier from this Purwokerto mendoan City.
True unique, let alone any motorcycle owner would baseball be named. see, mysterious or soap fame. You know, if you've hung out in the sacred books of the true biker is, will the famous a country,
More crazy again, the test is not alone. WJS piece seat style so rich, are forced to lift. reason ya, let me be stuck to her seat.
Technical artificial, U'i was not too complicated. Besides've katam about WJS, U'i live capture benchmark style. Modifier, who liked to wear shorts this, use the stop lights Honda CS-1 as a starting point. Just then, all customized designs and dimensions. "After the corner to see, just deh frame construction began contrived," said this father of two sons.
Rake angle more than 45 degrees. The material used as the framework is ¾-inch pipe. Under the cradle welded on the back deltabox. While the top end of the handle as well as rear lights
"Bone glued directly on the top of the original chassis located at the bottom of the tank directly to deltabox," added the modifier ngendon on Jl. Youth No. 709, Puwokerto this.
Construction was confirmed patent, so U'i sure strong. While electric welding on an additional order was also made without hesitation.
Though simple, but a modifier that used to play this chopper looks like the front of cool and slightly bloated. But the little problem, because the framework of a small V-Ixion. if imposed would be less good in design. Glossary words, lack matching, Bro!
Moreover U'i also retain the original deltabox. That motor still looks full and dense. Only, this skinny-boned boy add forms headlights handmade'll look forward in harmony with the overall harmonosasi. Sein also CS-1 is deliberately placed in front of the body.
Of specific NO EQUIPMENT DETAIL
Talk body, a modifier which makes the project more extreme motor has always been a hallmark of every artificial. That is, the detail and highlight the contours. Moreover, known as a modifier U'i super detail in the environment WJS (West Central Java Style).
So not be surprised if a man without a mustache is intentionally making body with full curves and distinct line. "Because the curves and lines can be created to accentuate the contours are obtained. That motor dynamic and have a characteristic look clear, "believes modifier that really understand the science of this design.
In addition to the strong side of the detail, U'i also dare to match color. Although the taste of regular cool motor using a darker color, U'i play with bright colors. Plus a few decorative figures and writings. At least, the impression still appear in the wild there. Stay in tune with the style of a true streetfighter wild.
DATA MODIFICATION
Front tire: Duro 110/70-17
Rear tire: 130/70-17 Duro
Rim: Sprint
Headlights: Variations
Taillights: CS-1
Handlebar: Clasps variations
Exhaust: Hand Made
EC: (0281) 621-790



Tuesday, September 21, 2010
MODIFIKASI Yamaha V-Max
MODIFIKASI Yamaha V-Max
Indeed Yamaha V-Max has got the look cool. But if that is still not satisfied then the Yamaha provides the latest accessories for the Vmax.
These accessories are available for the V-Max devirate 2009-2010. All of which could certainly make it a tuning fork mounts symbol increasingly cool.
"The parts are paired with accessories of course V-Max will make you look more wow!" Topspeed call, Tuesday (09/21/2010).
First, remove the rim of the V-Max is old and replace with Wide Wheel V-Max. Designed more broadly, the new rim is available in one package, including bearings, seals, o-ring, collar, screw, and the valve stem.
Next to the more impressive "wild" then can select accessories curtain chrome air intake cover. Do not miss all chrome exhaust pipe is selected so that there are accents sparkle on these motors.
When was stiincreasingly V-Max. And of course this tool can be more functional.
Indeed Yamaha V-Max has got the look cool. But if that is still not satisfied then the Yamaha provides the latest accessories for the Vmax.
These accessories are available for the V-Max devirate 2009-2010. All of which could certainly make it a tuning fork mounts symbol increasingly cool.
"The parts are paired with accessories of course V-Max will make you look more wow!" Topspeed call, Tuesday (09/21/2010).
First, remove the rim of the V-Max is old and replace with Wide Wheel V-Max. Designed more broadly, the new rim is available in one package, including bearings, seals, o-ring, collar, screw, and the valve stem.
Next to the more impressive "wild" then can select accessories curtain chrome air intake cover. Do not miss all chrome exhaust pipe is selected so that there are accents sparkle on these motors.
When was stiincreasingly V-Max. And of course this tool can be more functional.
Subscribe to:
Posts (Atom)